無論時樣件試制或是小批量試制，制作周期和質量都是采購商們關注的。畢竟新產品能越早投入市場就意味著越早占領市場先機。所以山東快速成型技術在新產品試制階段特別受人歡迎。下面來講講工業樣件快速成型的四大利器！

Regardless of the sample trial production or small batch trial production, the production cycle and quality are the concerns of buyers. After all, the earlier a new product can be put into the market, the earlier it will occupy the market. Therefore, rapid prototyping technology is particularly popular in the trial production stage of new products. Let's talk about the four sharp tools of rapid prototyping of industrial samples!

1、CNC加工成型

1. CNC processing and forming

工業樣件加工的主流方式。普爾泰模型配有大型精密CNC數控機床八臺，保證客戶的產品在內完成機加工。

The mainstream mode of industrial sample processing. Putai model is equipped with eight large precision CNC numerical control machine tools to ensure that customers' products can be machined in one day.

產品表面可以實現很好的處理：打磨，噴油，絲印，電鍍，氧化，拉絲等等，可以跟成品媲美（抗摔性好，精度高，表面處理仿真度達到99%以上）。

The surface of the product can be well treated: polishing, oil spraying, screen printing, electroplating, oxidation, wire drawing, etc., which can be comparable with the finished product (good fall resistance, high precision, surface treatment simulation degree of more than 99%).

CNC成型做機殼類手板強度好的工藝。

CNC molding is a process with good strength for making handboards of machine casings.

大加工尺寸可達1100mmX650mmX470mm，大限度滿足空調顯示器等大型外殼零件的一次加工需求！

The large processing size can reach 1100mm × 650mm × 470mm, which can largely meet the one-time processing requirements of large shell parts such as air conditioning display!

特點：尺寸大，強度高，韌性好。產品加工速度快，成本較低。

Features: large size, high strength, good toughness. The product processing speed is fast and the cost is low.

2、激光抄數

2. Laser reading

利用激光掃描原理，根據工件結構特點進行逐點掃描，同時又能利用計算機輔助，將3D圖進行等比例或者局部的放大和縮小，滿足客戶開發創意的需求。

The principle of laser scanning is used to scan the workpiece point by point according to the structural characteristics of the workpiece. At the same time, the 3D drawing can be enlarged and reduced in equal proportion or in part with the help of computer to meet the needs of customers to develop ideas.

特點：精度高，跟足原樣，效率快！

Features: high precision, follow the original, and fast efficiency!

3、3D打印

3. 3D printing

3D打印，又稱SLA（Stereolithography）技術。

3D printing, also known as SLA (Stereolithography) technology.

是一種基于液態光敏樹脂的光聚合原理。利用激光束對產品進行逐層固化，終實現產品的一體成型。

It is a photopolymerization principle based on liquid photosensitive resin. Use the laser beam to cure the product layer by layer, and finally realize the integrated molding of the product.

此工藝適合做一些公仔，玩具，手機等特殊的復雜零件或者曲面多的手板，精度高，強度好。

This process is suitable for making some special complicated parts such as dolls, toys, mobile phones or hand boards with many curved surfaces, with high precision and good strength.

4、真空批量復模

4. Vacuum batch copying

采用真空狀態下制作出硅膠模具，并利用液態材質灌注成型，成本低，速度快，能大大降低產品的開發費用，適合做一些小批量的前期開發試產。

Silicone mold is made under vacuum and poured with liquid material, which is low in cost and fast in speed, and can greatly reduce the development cost of the product. It is suitable for the preliminary development and trial production of some small batches.

其所采用的材質有ABS，PU,透明硬膠，透明軟膠，有色軟膠等等，其不同硬度，不同顏色的材質可以隨意調節，滿足不同產品對材質的不同要求。

The materials used include ABS, PU, transparent hard rubber, transparent soft rubber, colored soft rubber, etc. The materials with different hardness and colors can be adjusted at will to meet the different requirements of different products for materials.

工業樣件快速成型的四大利器的相關內容就講解到這里了，您對此有怎樣的問題就來我們網站http://m.faxuemingjia.com咨詢了解吧！

This is the relevant content of the four sharp tools for rapid prototyping of industrial samples. If you have any questions about this, please come to our website http://m.faxuemingjia.com Ask about it!